Installation - TM-9-2320-360-20-20874

TM 9-2320-360-20-2

NOTE

Lubricate shaft (LO 9-2320-360-12).

Align matchmarks on shaft and

steering gears.

Shaft must be

aligned for proper steering timing

(front and rear gears).

d. Installation

(1) Position steering shaft (1) between steering gear

(2) and tee box (3) with splined end of shaft

toward steering gear (2).

(2) Align keyway (4) on tee box (3) with slot on

steering shaft (1).

(3) Install yoke (5) on tee box (3) with screw (6) and

new locknut (7). Torque to 35-45 lb-ft (48-54

Nm).

(4) Install yoke (8) on steering gear (2) with screw

(9) and new locknut (10). Torque to 35-45 lb-ft

(48-54 Nm).

e. Follow-On Maintenance

(1) Lubricate shaft (LO 9-2320-360-12).

(2) Start engine (TM 9-2320-360-10).

(3) Check operation of steering (TM 9-2320-360-

10).

(4) Shut off engine (TM 9-2320-360-10).

13-23