Adjustment - TM-9-2320-360-20-20859

TM 9-2320-360-20-2

13-4. NO. 1 AND NO. 4 AXLE TIE ROD END REPAIR (CONT)

NOTE

Do steps (7) and (8) for no.

1 axle

only.

(7)

Install two spacers (9), clamps (10), and four

new locknuts (11) on tie rod (3) and bracket

(12).

NOTE

Plastic

cable

ties

should

positioned in location marked during

removal.

(8)

Install plastic cable ties (13) to secure hoses

(14) to tie rod (3).

(9)

Lubricate tie rods (LO 9-2320-360-12).

c. Adjustment

NOTE

This toe-in adjustment procedure

should only be used after the

replacement of a tie rod. It is not a

wheel alignment procedure.

(1)

Drive HET Tractor straight back about 20 ft (6

m), then straight forward about 20 ft (6 m). Park

with wheels straight.

13-8