2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
CAUTION
If wheel studs are replaced, they
must be torqued after 50-75 mi (80-
120 km) of use. Failure to comply
may result in failure of wheel studs.
NOTE
Do step (6.1) only if studs were
removed.
Studs must be firmly seated and
square in rim.
Flat edge of stud must face edge
of rim.
(6.1) Install stud(s) (5.1) on innerwheel (10).
(7) Install two new preformed packings (6)
and new grommets (7) on two valve stems
(8).
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to akin and clothing. To
avoid injury or death, keep away from
open fire and use In well-ventilated
area. If adhesive sealant gets on skin
or clothing, wash Immediately with
soap and water.
(8) Coat threads of two retaining nuts (9) with
adhesive-sealant.
(9) Install two valve stems (8) on inner wheel
(10) with retaining nuts (9).
NOTE
To ensure proper sealing, inner
wheel bead and seal areas must be
clean.
(10) Wet new seal (11) with tire lubricant and
position on inner wheel (10).
Change 3 12-23
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |