2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
12-3. WHEEL VALVE AND BRACKET REPAIR
This task covers:
a. Removal
c. Follow-On Maintenanc e
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Air system drained (TM 9-2320-360-10).
Compound, Sealing, Pipe Thread (Item 15,
CTIS hoses removed (para 12-4).
Locknuts (2) (Item 68, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
Socket Wrench Set, 3/8 In. Drive (Item 45,
a. Removal
NOTE
All wheel valves are removed the
same way. Axle no. 1 is shown.
(1) Remove two nuts (1) from studs (2).
(2) Remove valve (3) with bracket (4) from
wheel (5).
(3) Remove two locknuts (6) and separate
valve (3) from bracket (4).
Discard
locknuts.
(4) Remove two fittings (7) from valve (3).
(5) Remove valve stem (8) from elbow (9).
(6) Remove elb ow (9) from valve (3).
Change 1 12-13
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |