Installation - TM-9-2320-360-20-20757

TM 9-2320-360-20-2

NOTE

Tag and mark wires and hoses before

removal.

(4) Remove wire no. 1719B (8) and wire no.

1719C (9) from sending unit (10).

(5) Remove hose no. 2661 (11) from elbow (12).

(6) Remove hose no. 2054 (13) from elbow (14).

(7) Remove hose no. 2662 (15) from elbow (16).

(8) Remove two elbows (14 and 16) from valve

(6).

(9) Remove tee (17) from valve (6).

(10) Remove sending unit (10) from elbow (18).

(11) Remove elbow (12) and elbow (18) from tee

(17).

b. Installation

WARNING

Pipe thread sealing compound can burn easily, can give off harmful vapors, and is

harmful to skin and clothing. To avoid injury or death, keep away from open fire

and use in well-ventilated area. If pipe thread sealing compound gets on skin or

clothing, wash immediately with soap and water.

CAUTION

Use pipe thread sealing compound

sparingly only on pipe threads. Do

not apply compound to no. hose

connections. Damage to equipment

may result.

(1) Coat threads of tee (1) and two elbows (2

and 3) with pipe thread sealing compound.

(2) Install tee (1) on valve (4).

(3) Install two elbows (2 and 3) on valve (4).

(4) Coat threads of sending unit (5), elbow

(6), and elbow (7) with pipe thread sealing

compound.

(5) Install elbow (7) and elbow (6) on tee (1).

(6) Install sending unit (5) on elbow (7).

11-145