 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
NOTE
Ensure canister is fully seated on
inner cylinder before installing.
(8) Install canister (10) in housing (8).
(9) Install desiccant cartridge (16) and
retainer (17) in inner cylinder (12) of
canister (10).
(10) Install three new preformed packings (18,
19, and 20) and spring (21) on top cover
(22).
CAUTION
Nuts must be tightened evenly to
prevent
damage
to
preformed
packing and air dryer.
NOTE
Align matchmarks on top cover and
housing when installing.
(11) Install top cover (22) on housing (8) with
six nuts (23). Tighten nuts to 180 lb-in.
(20 Nm).
(12) Install new preformed packing (24) on
check valve cap (25).
NOTE
Install disc with rubber side in.
Install spring with smallest diameter
toward disc.
(13) Install new disc (26), spring (27), and
check valve cap (25) on top cover (22).
Torque to 48 lb-in. (5 Nm).
WARNING
Pipe thread sealing compound can
burn easily, can give off harmful
vapors, and is harmful to skin and
clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If pipe thread
sealing compound gets on skin or
clothing, wash immediately with soap
and water.
(14) Coat threads of relief valve (28) with pipe
thread sealing compound.
(15) Install relief valve (28) on top cover (22).
Change 1 11-139
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
