 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
NOTE
Matchmark lower cover and housing
before separating.
(18) Remove six nuts (33) and bottom cover
(12) from housing (20).
(19) Remove preformed packing (34) from
bottom cover (12). Discard preformed
packing.
(20) Remove three screws (35), gasket (36),
and exhaust tube (37) from bottom cover
(12). Discard gasket.
NOTE
One-inch OD nut in purge valve may
be used to turn purge valve
counterclockwise to remove.
(21) Remove purge valve (38) from bottom
cover (12).
(22) Remove preformed packing (39) from
purge valve (38).
Discard preformed
packing.
c. Assembly
(1) Install new preformed packing (1) on
purge valve (2).
NOTE
One-inch OD nut in purge valve may
be used to turn purge valve
clockwise to install.
(2) Install purge valve (2) on bottom cover (3).
Torque to 48 lb-in. (5 Nm).
(3) Install new gasket (4), exhaust tube (5),
and three screws (6) on bottom cover (3).
Torque to 60 lb-in. (7 Nm).
(4) Install new preformed packing (7) on
bottom cover (3).
CAUTION
Nuts must be tightened evenly to
prevent
damage
to
preformed
packing and air dryer.
NOTE
Align matchmarks on bottom cover
and housing when installing.
(5) Install bottom cover (3) on housing (8)
with six nuts (9). Torque to 180 lb-in. (20
Nm).
11-129
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
