Follow-On Maintenance - TM-9-2320-360-20-20680

TM 9-2320-360-20-2

11-22. NO. 4 AIR RESERVOIR AND VALVE REPAIR (CONT)

(4) Install hose no. 2011 (11) on elbow (12).

NOTE

Crossover hose is installed by

turning tee clockwise and guiding

hose into fitting.

(5) Install crossover hose (13) on fitting (14).

(6) Install hose no. 2617 (15) on elbow (16).

(7) Install new cable (17) and two new

sleeves (18) on drain valve (19) and no. 3

air reservoir clamp (20).

(8) Crimp two sleeves (18) on cable (17) so

that a 0.75 in. (2 cm) loop is formed.

e. Follow-On Maintenance

(1) Start engine (TM 9-2320-360-10).

(2) Build up air pressure to 120-125 psi (827-

862 kPa).

(3) Shut off engine (TM 9-2320-360-10).

(4) Check for leaks.

(5) Remove wheel chocks.

11-86