 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
CAUTION
Threads of piston must be flush with
clevis. Failure to comply may cause
brake failure.
(14) Install clevis (15) on brake chamber (4).
(15) Push lock (16) in while turning adjusting
screw (17) clockwise until holes in clevis
(15) and slack adjuster (18) are aligned.
(16) Install pin (19) and new cotter pin (20) on
clevis (15) of brake chamber (4).
(17) Tighten jamnut (21) against clevis (15).
(18) Install two air lines (22) on brake chamber
(4).
(19) Loosen and remove nut (1) and washer
(2) from tool (3).
(20) Push tool (3) down, turn counterclockwise
900. Pull out of slot (7) Inside brake
chamber (4).
(21) Install dust cap (5) in access hole (6).
(22) Install tool (3), washer (2), and nut (1) in
mounting position on brake chamber (4).
Tighten nut.
c. Follow-On Maintenance
(1) Start engine (TM 9-2320-360-10).
(2) Check AIR PRESSURE gage for correct
reading (TM 9-2320-360-10).
(3) Shut off engine (TM 9-2320-360-10).
(4) Check for leaks.
(5) Adjust brakes (para 11-2).
11-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
