2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
c. Installation
WARNING
Brake shoes are installed with
strong spring tension.
Keep
hands clear when installing parts
to prevent serious injury.
When replacing brake shoes, all
four shoes on an axle must be
replaced at the same time.
Failure to comply may result in
improper brake operation and
injury to personnel.
NOTE
Use pry bar to raise or lower brake
shoes from rollers and pins.
(1) Install two springs (1) on brake spring pins
(2) on brake shoes (3).
(2) Install two brake shoes (3) and springs (1)
on axle (4) and two spring studs (5).
Change 2 11-6.1 (11-6.2 blank)
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |