 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
WARNING
Adhesive-sealant can bum easily, can
give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well ventilated
area. If adhesive-sealant gets on skin
or clothing, wash immediately with
soap and water.
(3) Coat mounting surface of lockout shift
chamber (3) with adhesive-sealant (Item
4, Appendix C).
(4) Install new copper washer (4) on stud (5).
(5) Install lockout shift chamber (3) on stud
(5).
(6) Install new lockwashers (6) on screws (7).
(7) Coat threads of screws (7) with adhesive-
sealant (Item 6, Appendix C).
(8) Install new lockwashers (6) and screws (7)
on lockout shift chamber (3). Torque to
200 lb-in. (23 Nm).
(9) Install new copper washer (8) and new
locknut (9) on stud (5).
(10) Install new preformed packing (10) and
plug (11) on lockout shift chamber (3).
(11) Install hose no. 2769 (12) on elbow (1).
(12) Install hose no. 2874 (13) on elbow (2).
c. Follow-On Maintenance
(1) Start engine (TM 9-2320-360-10).
(2) Build up air pressure to 120-125 psi (827-
862 kPa).
(3) Check for leaks and proper operation of
lockout shift chamber (TM 9-2320-360-
10).
(4) Shut off engine (TM 9-2320-360-10).
(5) Remove wheel chocks.
9-23 (9-24 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
