 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
(8) Remove
four
screws
(13)
from
transmission range selector (14).
(9) Remove transmission range selector (14)
from console (15).
(10) Loosen jamnut (16) on shift cable (7).
(11) Remove two nuts (17), lockwashers (18),
screws (19), bracket (20), and plate (21)
from shift plate (22). Discard lockwashers.
(12) Unscrew shift cable (7) from transmission
range selector (14).
(13) Push grommet (23) down through cab
floor (24).
(14) Remove grommet (23) from shift cable (7).
(15) Pull shift cable (7) up through cab floor (24).
b. Installation
NOTE
Grommet should slide
freely
on
plastic cable casing.
(1) Install grommet (1) on shift cable (2).
NOTE
Shift cable must be routed to the
inside of wire harness.
(2) Route shift cable (2) through cab floor (3)
to transmission range selector (4) with aid
of assistant.
NOTE
Install cable until threads are visible
through pivot.
(3) Screw shift cable (2) on transmission
range selector (4).
(4) Install bracket (5) and plate (6) on shift
plate (7) with two screws (8), new
lockwashers (9), and nuts (10).
(5) Tighten jamnut (11) on shift cable (2).
(6) Install transmission range selector (4) on
console (12) with four screws (13).
(7) Seat grommet (1) in cab floor (3).
8-11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
