Installation - TM-9-2320-360-20-20521

TM 9-2320-360-20-2

b. Installation

(1) Coat new gasket (1) with clean lubricating

oil.

(2) Fill new filter (2) with lubricating oil two-

thirds full.

(3) Install new filter (2) and gasket (1) on

adapter (3) by hand by turning clockwise.

(4) Tighten filter (2) until gasket (1) touches

adapter (3), then tighten additional two-

thirds turn.

c. Follow-On Maintenance

(1) Start engine (TM 9-2320-360-10).

(2) Check for leaks.

(3) Check transmission fluid level (TM 9-2320-360-10).

(4) Shut off engine (TM 9-2320-360-10).

(5) Remove wheel chocks.

Change 1 8-3