|
|
TM 9-2320-360-20-2
7-96. VENTILATOR REPAIR (CONT)
(15) Install blower housing (19) in upper case
(9) with three new locknuts (30).
(16) Install two spade connectors (31) on
motor assembly wire harness (32).
(17) Apply electrical tape to spade connectors
of motor assembly wire harness (32).
(18) Install speed control resistor (33) in upper
case (9) with two screws (34).
(19) Install electrical connector (35) on speed
control resistor (33).
CAUTION
When installing cover, front grill must
fit inside of lip on cover. Failure to
comply may result in damage to
grille.
(20) Install cover (2) on upper case (9) with
eight screws (36).
7-300 Change 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |