 |
|||
|
|
|||
|
Page Title:
Lower Plenum Disassembly cont'd |
|
||
| ||||||||||
|
|
 TM 9-2320-360-20-2
7-96. VENTILATOR REPAIR (CONT)
(5) Remove electrical connector (9) from fan
switch (6).
(6) Loosen screw (10) and remove wire (11)
from circuit breaker (12).
(7) Remove spade connector (13) from circuit
breaker (12).
(8) Remove nut (14) and fan switch (6) from
switch plate (8).
(9) Remove nut (15), lockwasher (16) and
circuit breaker (12) from switch plate (8).
(10) Remove two screws (17) and lens (18)
from dome light housing (19).
(11) Remove lamp (20) from two clips (21).
NOTE
Tag and mark wires before removal.
(12) Disconnect wire
(22)
from
positive
terminal (23).
(13) Disconnect wire
(24)
from
negative
terminal (25).
(14) Remove two locknuts (26), screws (27)
and dome light housing (19) from switch
plate (8). Discard locknuts.
NOTE
Do steps (15) thru (17) only if foam
strips fail inspection.
(15) Remove three foam strips (28) from
plenum chamber (2).
(16) Remove foam strip (29) from plenum
chamber (2).
(17) Remove foam strip (30) from plenum
chamber (2).
7-294 Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
