2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
b. Installation
(1) Route CTIS wire harness (1) through floor
(2).
(2) Install harness connector (3) on controller
(4).
(3) Install ground wire (5) on dash assembly
(6) with screw (7) and new locknut (8).
NOTE
Plastic
cable
ties
should
be
positioned in locations marked
during removal.
(4) Install plastic cable ties (9) on CTIS wire
harness (1).
(5) Install two clips (10 and 11) on CTIS wire
harness (1) and cab wire harness (12).
(6) Install two clips (10 and 11) on cab wall
(13) with screws (14).
7-199
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |