 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
7-64. CTIS POWER MANIFOLD REPLACEMENT (CONT)
CAUTION
Retainer, spring and ball are located
in porting block.
Use care when
working around porting block after
CTIS power manifold is removed.
Failure to comply may result in loss
of retainer, spring and ball.
(5) Remove four screws (12), power manifold
(11), preformed packing (13), and
preformed packing (14) from porting block
(15). Discard preformed packings.
(6) Remove preformed packing (16) and
preformed packing (17) from porting block
(15). Discard preformed packings.
b. Installation
(1) Install new preformed packing (1) and new
preformed packing (2) on porting block (3).
CAUTION
The manifold must be lowered
straight down onto the porting block
without any side movement. Four
mounting screws are installed before
lowering manifold to prevent any side
movement. Failure to comply may
result in damaged to preformed
packings.
NOTE
Do not lower power manifold until
step (4).
(2) Install new preformed packing (4) and new
preformed packing (5) on porting block
(3).
(3) Position power manifold (6) on porting
block (3) with four screws (7).
(4) Lower power manifold (6) on porting block
(3) and tighten four screws (7).
7-192 Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
