 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
(3) Remove four batteries (5) from battery box
(6) using handles (7).
c. Battery Box/Bracket Removal
NOTE
Do steps (1) and (2) if arctic kit is
installed on HET Tractor,
(1) Loosen screw (1) on clamp (2). Remove
clamp (2) from exhaust hose (3).
(2) Push exhaust hose (3) out through hole in
bottom of battery box (4).
(3) Remove locknut (5), clip (6), and screw (7)
from battery box (4) and battery cables (8
and 9). Discard locknut.
NOTE
Do step (4) only if grommet or quick-
edge molding is damaged.
(4) Remove grommet (10) and quick-edge
molding (11) from rear of battery box (4).
NOTE
Tag and mark cables and
wire
harnesses before removal.
(5) Push two cables (8 and 9) and three wire
harnesses (12, 13, and 14) out through
holes in rear of battery box (4).
WARNING
Properly support battery box during
removal. Battery box could fall and
cause Injury to personnel.
(6) Remove two cotter pins (14.1), nuts (15),
washers (16), guides (17), screws (18),
washers (18.1), battery box (4), and tray
(19) from mounting bracket (20) with aid of
assistant. Discard cotter pins.
7-163
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
