Installation - TM-9-2320-360-20-20369

TM 9-2320-360-20-2

7-55. BACKUP ALARM REPLACEMENT (CONT)

b. Installation

(1) Install wire no. 1149 (1) on positive (+)

terminal (2) with nut (3).

(2) Install wire no. 1435 (4) on negative (-)

terminal (5) with nut (6).

(3) Slide boot (7) on negative (-) terminal (5).

(4) Slide boot (8) on positive (+) terminal (2).

(5) Install quickedge molding (9) on guard

(10).

(6) Install guard (10) and backup alarm (11)

on rear plate (12) with four screws (13)

and new locknuts (14).

c. Follow-On Maintenance

(1) Turn ENGINE switch to ON position (TM 9-2320-360-10).

(2) Place transmission range selector in R (reverse) position and listen for alarm to sound (TM 9-2320-360-10).

(3) Place transmission range selector in N (neutral) position (TM 9-2320-360-10).

(4) Turn ENGINE switch to OFF position (TM 9-2320-360-10).

(5) Remove wheel chocks.

7-156 Change 1