2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
b. Disassembly
NOTE
Screws are not designed
to
be
removed from cover.
(1) Loosen four captive screws (1)and
remove gasket (2) and door (3) from
housing (4). Discard gasket.
(2) Remove reflector (5) and lamp (6) from
socket (7).
c. Assembly
(1) Install lamp (1) and reflector (2) in socket
(3).
(2) Install new gasket (4) and door (5) on
housing (6). Tighten four captive screws
(7).
d. Installation
(1) Install bell washer (1) and spacer (2) on
housing (3).
(2) Install housing (3) and ground wire (4) on
mounting bracket (5) with washer (6), new
lockwasher (7), and nut (8). Torque to 18-
20 Ib-ft (24-27 Nm).
(3) Install plug (9) in connector (10).
e. Follow-On Maintenance
(1) Check blackout
lights
operation
(TM
9-2320-360-10).
(2) Close engine hood (TM 9-2320-360-10).
(3) Remove wheel chocks.
7-139
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |