Temperature Sensor Installation

TM 9-2320-360-20-2

7-10.

DDEC COOLANT LEVEL SENSOR/ALARMSTAT/TEMPERATURE SENSOR/DDEC COOLANT LEVEL

MODULE REPLACEMENT (CONT)

f. Temperature Sensor Installation

WARNING

Pipe thread sealing compound can

burn easily, can give off harmful

vapors, and is harmful to skin and

clothing. To avoid Injury or death,

keep away from open fire and use in

well-ventilated area. If pipe thread

sealing compound gets on skin or

clothing, wash immediately with soap

and water.

(1) Coat threads of temperature sensor (1) with pipe

thread sealing compound.

(2) Install temperature sensor (1) in left thermostat

housing (2).

(3) Install wire no. 1320 (3), new lockwasher (4),

and nut (5) on temperature sensor (1).

g. DDEC Coolant Level Module Removal

NOTE

Subparagraphs g. and h. apply

only to DDEC II vehicles.

Location of

plastic cable tie

should

marked

before

removal.

(1) Remove plastic cable tie (1) securing

coolant level module (2) to wire bundle

(3).

NOTE

Coolant level module is removed by

gently prying on tab and pulling on

connector.

(2) Remove coolant level module (2) from

connector (4).

7-34 Change 3