Adjustment - TM-9-2320-360-20-20222

TM 9-2320-360-20-2

7-7. 24-VOLT (FRONT) ALTERNATOR BELT ADJUSTMENT/REPLACEMENT (CONT)

c. Adjustment

NOTE

If belts have been replaced, begin

with step (2).

(1) Loosen nut (1) at top of alternator (2).

(2) Adjust tension on two belts (3) by turning

adjusting nut (4) counterclockwise.

(3) Position belt tension gage (5) on belt (3).

(4) When belt tension gage indicates 70-90 lb (310-

400 N), tighten nut (1) at top of alternator (2).

(5) Tighten screw (6) on rod end eye (7).

(6) Remove belt tension gage (5) from belt (3).

(7) Deleted.

d. Follow-On Maintenance

(1) Close engine hood (TM 9-2320-360-10).

(1.1) Install inner fender (para 16-34).

(2) Remove wheel chocks.

7-22 Change 1