Cleaning/inspection - TM-9-2320-360-20-20196

TM 9-2320-360-20-2

6-14. COOLANT FILTER MOUNTING HEAD REPLACEMENT (CONT)

NOTE

Loosen screw in step (5) enough to

allow rotation of coolant filter

mounting head on screw.

(5) Loosen screw (7)

coolant

filter

mounting head (4).

(6) Rotate coolant filter mounting head (4) on

screw (7) and install two screws (5) in side

of air horn bracket (8) and radiator (9).

(7) Remove screw (7), lockwasher (10), and

coolant filter mounting head (4) from air

horn bracket (8). Discard lockwasher.

(8) Remove valve (11) and fitting (12) from

coolant filter mounting head (4).

(9) Remove valve (13) from coolant filter

mounting head (4).

b. Cleaning/inspection

WARNING

Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and

gloves and use only in a well-ventilated area. Avoid contact with skin, eyes, and

clothes, and don't breathe vapors. DO NOT use near open flame or excessive heat.

The flash point is 100-138 F (38-59 C). If you become dizzy while using cleaning

solvent, get fresh air immediately and medical aid. If contact with eyes is made,

wash your eyes with water and get medical aid immediately.

(1) Clean threads of valves and fitting with dry cleaning solvent.

(2) Remove excess dry cleaning solvent using a wire brush.

6-62