2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
(14) Install clip (22) and screw (23) on radiator
(5).
(15) Install two spacers (24), washers (25), and
new locknuts (26) on studs (21). Torque
to 110 Ib-ft (149 Nm).
(16) Install two rubber mounts (27) on hardlift
brackets (28).
NOTE
Do not use nuts on large end of
mount to tighten. Only use nuts on
small end to tighten and mushroom
mount.
(17) Install two nuts (29) and washers (30) on
tie rods (17).
(18) Install tie rods (17) in hardlift bracket (28).
(19) Remove lifting device from radiator (5).
NOTE
When tie rods are properly
installed, clearance between top of
radiator and hardlift bracket is 1.75
in. (4.45 cm).
Tie rod should be centered between
radiator and hardlift bracket.
(20) Install two washers (31), new lockwashers
(32) and nuts (33) on tie rods (17).
6-19
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |