 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
6-2. COOLING SYSTEM SERVICE (CONT)
e. Coolant Filter Replacement
(1) Turn outlet valve (1) and inlet valve (2) on
coolant filter mounting head (3) clockwise to
close.
(2) Turn coolant filter (4) counterclockwise
to
remove from coolant filter mounting head (3).
(3)
Remove old gasket (5) with coolant filter (4).
Discard gasket and filter.
CAUTION
Replacement coolant filters contain
an engine coolant additive. Do not
add additional additive to cooling
system. Failure to comply may result
in over concentration of additive.
NOTE
Coolant filter PFC-8A should be used
during regularly scheduled filter
replacement. Coolant filter PFC-24A
must be used whenever coolant is
changed.
(4)
Lubricate new gasket (5) on new coolant filter
(4) with thin film of coolant.
(5)
Install new coolant filter (4) on coolant filter
mounting head (3).
(6)
Turn coolant filter (4) clockwise until gasket
(5)
contacts base of coolant filter mounting head
(3).
CAUTION
Do not install coolant filter with a
filter wrench. HAND-TIGHTEN ONLY.
(7)
Hand-tighten coolant filter (4). Tighten an
additional 3/4 turn after filter (4) contacts
mounting head (3).
f. Filling
NOTE
Ensure all cooling system
drain
cocks are closed.
(1) Fill cooling system (LO 9-2320-360-12).
(2) Deleted.
6-8 Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
