 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
4-3. AIR CLEANER ASSEMBLY REPAIR (CONT)
(8) Install new gasket (24) and scoop (19) on
air cleaner (2).
(9) Install six washers (25) and screws (26)
on scoop (19). Torque to 20-25 lb-in. (2.3-
2.8 Nm).
(10) Install four plugs (27) in scoop (19).
(11) Install rubber drain valve (28) on air
cleaner (2).
d. Installation
CAUTION
Do not allow rubber washer to turn
with locknut when installing air
cleaner.
Failure to comply may
cause damage to rubber washer.
(1) Install air cleaner (1) on fender (2) with
four screws (3), new rubber washers (4),
washers (5), and new locknuts (6) with aid
of assistant. Torque to 95 lb-in. (11 N-m).
(1.1) Install screw (6.1) on air cleaner (1) and
fender (2) with washer (6.2) and new
locknut (6.3). Torque to 95 lb-in. (11
Nm).
(2) Connect wiring harness (7) to STE/ICE
sensor connector (8).
(3) Install air restriction hose no. 2381 (9) on
fitting (10).
(4) Install hose no. 2600 (11) on elbow (12).
(5) Install air aspiration hose no. 2938 (13)
on air cleaner (1) with clamp (14). Torque
to 60 lb-in. (6.7 Nm).
e. Follow-On Maintenance
Install air intake hose (para 4-4).
4-8 Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
