 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
b. Installation
WARNING
Pipe thread sealing compound can
burn easily, can give off harmful
vapors, and is harmful to skin and
clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If pipe thread
sealing compound gets on skin or
clothing, wash immediately with soap
(1) Coat threads of fitting (1), tee (2), elbow
(3), and AOAP sampling valve (4) with
pipe thread sealing compound.
(2) Install fitting (1) on engine block (5).
NOTE
Rotate tee to provide a minimum of 3
in. (7.62 cm) clearance between hose
and back of alternator studs.
(3) Install tee (2) on fitting (1).
(4) Install elbow (3) on tee (2).
(5) Install hose no. 2682 (6) on elbow (3).
NOTE
Plastic cable ties should be
positioned in location marked during
removal.
(5.1) Route hose no. 2682 (6) over hose no.
2761 (6.1) and secure with plastic cable
tie (6.2).
(6) Install fitting (7) on hose no. 2682 (6).
(7) Install AOAP sampling valve (4) on
fitting (7).
(8) Install clip (8) on hose no. 2682 (6).
(9) Install clip (8) on hardlift bracket (9) with
screw (10) and new locknut (11).
c. Follow-On Maintenance
Install oil pressure switch (para 7-78).
Change 1 3-25/3-26 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
