2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
3-6. ENGINE DIPSTICK TUBE REPLACEMENT (CONT)
(7) Remove locknut (24), screw (25), cushion
clip (26), and cushion clip (27) from
bracket (28). Discard locknut.
(7.1) Remove locknut (29), screw (30), and
cushion clip (31) from bracket (28).
Discard locknut.
NOTE
Dipstick tube is pulled out from left
side of HET Tractor.
(8) Remove dipstick tube (20) from HET
Tractor.
(9) Remove cushion clips (27 and 31) from
dipstick tube (20).
b. Installation
(1) Install cushion clips (1 and 1.1) on dipstick
tube (2).
NOTE
Dipstick tube is routed in from left
side of HET Tractor.
(2) Position dipstick tube (2) on HET Tractor.
3-20
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |