 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
b. Fill
CAUTION
Do not overfill engine with oil.
Serious damage to engine may
occur.
(1) Remove oil filler cap (1) from rocker cover
(2).
(2) Place funnel in rocker cover (2).
(3) Fill engine with clean engine oil through
rocker cover (2).
(4) Start engine (TM 9-2320-360-10) and let
run for approximately 10 minutes.
(5) Shut off engine (TM 9-2320-360-10).
NOTE
Let engine sit for approximately 15
minutes before checking oil level.
(6) Turn dipstick handle (3) counterclockwise
and remove dipstick (4) from dipstick tube
(5).
(7) Wipe off dipstick (4) with dean rag.
(8) Install dipstick (4) completely into dipstick
tube (5) and remove from dipstick tube.
(9) Check oil level on dipstick (4).
(10) Install dipstick (4) in dipstick tube (5) and
turn handle (3) clockwise to secure.
(11) Add oil as necessary.
(12) Repeat steps (6) thru (11) until oil is at
proper level.
c. Follow-On Maintenance
(1) Check for leaks.
(2) Close engine hood (TM 9-2320-360-10).
(3) Remove wheel chocks.
3-13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
