 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
e. Installation
NOTE
New
gasket
may
appear
oversized.
Oil in rocker cover groove or on
gasket will make it difficult to
install.
Gasket should be installed at four
corners first. Then remainder of
gasket should be pressed into
place.
(1) Install new gasket (1) in groove of rocker
cover (2).
(2) Install rocker cover (2) on cylinder head
(3).
(3) Install two mounts (4), washers (5), and
screws (6). Torque to 15-20 lb-ft (20.3-
27.1 N m).
(4) Install breather tube (7) on engine lifting
bracket (8) with clip (9), new lockwasher
(10), and screw (11).
(5) Install breather tube (7) on breather
retainer (12) with clamp (13).
NOTE
Do steps (6) thru (8) for left rocker
cover only.
(6) Install air aspiration hose no. 2938 (14) on
air cleaner assembly (15) with clamp (16).
Torque to 60 lb-in. (6.7 Nm).
(7) Secure air aspiration hose no. 2938 (14)
on standoff bracket (17) with clip (18),
screw (19), and new locknut (20).
NOTE
Plastic cable tie should be positioned
in location marked during removal.
(8) Secure ether start hose (21) to breather
tube (7) with plastic cable tie (22).
3-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
