 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-5. DIFFERENTIAL (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (cont)
31
Differen-
a. All parts
Lubricate
Axle lubricant
tial case
and case (9
and gear
and 10) inner
assembly
walls
b. Side gear
Install
In case half (10)
thrust washer
(15) and side
gear (16)
c. Helical spur
Position
On case half (10)
gear (11)
32
Spider (19)
Four pinions (18)
Install
and thrust
washers (17)
33
Case half
Spider (19)
Install
(10)
34
Spider (19)
Side gear (16)
Install
and side gear
thrust washer
(15)
35
Case half
a. Case half (9)
Position
Aline mating marks
(10)
b. Four capscrews
Install
Equally spaced around case
(12), washers
half (9). Check assembly for
(13), and
free rotation
nuts (14)
c. Remaining cap-
Install
Tighten all capscrews (12) to
screws (12),
150-190 pounds foot and
washers (13),
install lock wire
and nuts (14)
36
Case halves
New bearings (20)
Press on
If old bearings (20) were
(9 and 10)
removed
CAUTION
In step 37, adjusting nuts (7) are cross threaded if differential bearing caps (2) do not seat properly. Remove caps
and reposition adjusting nuts. If you force caps into place, you will cause irreparable damage to differential carrier
housing (1).
4-163
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals