INSPECTION (cont) - TM-9-2320-285-24-20637

TM 9-2320-285-24-2

4-5. DIFFERENTIAL (CONT)

STEP

LOCATION

ITEM

ACTION

REMARKS

INSPECTION (cont)

NOTE

Immediately after performing inspection, coat all parts with light oil to prevent corrosion.

REASSEMBLY

NOTE

Lubricate all parts and inner walls of differential case (9 and 10) with axle lubricant (refer to current lubrication order).

Torque limits given apply to parts coated with machine oil; for dry parts, increase torques 10 percent; for parts

coated with axle lubricant, decrease torques 10 percent.

Differen-

a. Fill plug

Install

If fill plug (61) was

tial(61)

removed. Tighten to 35

carrier

pounds foot

housing

b. New gasket (60)

Position

(1)

and front

cover (57)

c. Four capscrews

Install

Tighten to 35-50 pounds foot

(58) and lock

washers (59)

d. New gasket (56)

Position

and inspec-

tion hole

cover (54)

e. Four capscrews

Install

Tighten to 35-50 pounds foot

(55) and lock

washers (63)

f. New bearing cup

Press on

If old bearing cup (53) was

(53)

removed

g. Correct shims

Position

If removed earlier

(52) and

cross shaft

cover (51)

h. Six capscrews

Install

If removed earlier. Tighten

(49) and lock

capscrews (49) to 130-165

washers (50)

pounds foot. If cross

shaft cover (51) wasn't

removed, double check

torque values

4-156