 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-5. DIFFERENTIAL (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY (cont)
5
b. Bearing cage
Remove
If bearing cage (25) is not
(cont)
(25)
free, tap loose using hammer
and brass drift on inner
face of drive pinion (28) or
use puller screws in holes
provided
c. Shims (29)
Remove
Wire together
d. Drive pinion
Remove
Press from bearing cage (25)
(28)
e. Yoke (21)
Remove
f. Oil seal (30)
Remove
Discard
g. Outer bearing
Remove
(31)
h. Outer bearing
Remove
Only if inspection shows outer
cup (32)
bearing (31) should be re-
placed. Press from bearing
cage (25)
i. Inner bearing
Remove
Only if inspection shows inner
cup (33)
bearing (34) should be re-
placed. Press from bearing
cage (25)
j. Fill plug (35)
Remove
Only if inspection shows re-
placement is necessary
k. Slinger (22)
Remove
From yoke (21) only if
damaged
6
Drive
a. Bearing spacer
Remove
Retain for reassembly
pinion (28)
(36)
b. Inner bearing
Remove
Only if inspection shows re-
(34)
placement is necessary. Use
mechanical puller kit to
remove from drive pinion
(28)
7
Cross shaft
a. Six capscrews
Remove
bearing
(38) and lock
cage (37)
washers (39)
b. Cross shaft
Remove
With pry bar between back of
bearing cage
drive gear (40) and carrier
(37)
housing (2)
c. Shims (41)
Remove
Wire together
4-151
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals