 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-4.
TRANSMISSION (CONT)
1. Oil Pump and Front Support Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION
7
a. Support (24)
Inspect
Do not separate. If you feel
and sleeve
movement between support
(24) and sleeve, or if
sleeve is damaged, replace
sleeve and support (24) as
an assembly
b. Body (23),
Inspect
Replace all three parts if any
drive gear
one is damaged. Position
(26), and
body (23) flat side up and
driven gear
install drive gear (26) and
(27)
driven gear (27) into it.
Place straightedge across
body and gears. Check with
thickness gage for clearance
between straightedge and
each gear. If clearance is
is more than 0.0024 inch,
replace gears. If clearance '
is still more than 0.0024
inch, replace body (23),
ve gear (26), and driven
gear (27) as a unit
c.
Pressure regu-
Inspect
Replace if cracked, worn, dis-
lator spring
torted, broken or per-
(12) and lock-
manently set
up valve
spring (13)
d. Pressure regu-
Inspect
Inspect for wear, damage, bent
lator valve
or broken condition and dis-
(17) and lock-
tortion; if any of these
up valve (19)
conditions are observed,
replace part
e. Capscrews
Inspect
Replace any capscrews that are
(1, 20, and
bent or have damaged
threads
21)
f. Bearing assem-
Inspect
Replace if bearing binds or
blies (6 and
drags
8)
g. All other parts
Inspect
Inspect for wear, damage,
cracks, and distortion;
replace part if any of these
conditions are observed
4-140
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals