 |
|||
|
|
|||
|
Page Title:
Governor and Rear Cover Assembly |
|
||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-4. TRANSMISSION (CONT)
k. Governor and Rear Cover Assembly.
This task covers:
a. Removal
d.
Inspection
b. Disassembly
e
Reassembly
c. Cleaning
f.
Installation
INITIAL SETUP:
Tools
Materials/Parts
No. 2 Common Organizational Maintenance
Cleaning solvent
Item 1, Appendix C
Tool Kit
Clean cloths
Item 2, Appendix C
Socket wrench handle, 1/2 inch drive
Light machine oil
Item 7, Appendix C
Socket wrench set, 1/2 inch drive
Transmission
Flat tip screwdriver
fluid
Item 8, Appendix C
Hand hammer
Non-hardening
Mechanical puller kit
sealant
Item 10, Appendix C
Safety glasses
Gasket
FSCM 73342 PN 6837442
Torque wrench, 1/2 inch drive,
Governor service
175 pounds foot capacity
kit
FSCM 73342 PN 6880353
Sharpening stone
Governor cover
Retaining ring pliers
gasket
FSCM 73342 PN 23011670
Brass drift
Governor weight
Lifting tool
pins
FSCM 73342 PN 8623232
Hoist
Oil seal
FSCM 73342 PN 6773311
Arbor press
Dust shield
FSCM 73342 PN 6757563
Bearing and gear remover J-22912-01
Governor filter
Output shaft oil seal and dust
kit
FSCM 73342 PN 6884749
shield remover assembly J-24171
Governor filter
FSCM 73342 PN 6882687
Low and first clutch spring
0-ring seal
FSCM 73342 PN 6882689
compressor J-24452
Personnel Required
Clutch spring compressor base for low,
Automotive Repairer MOS 63H
first, fourth clutches J-24204-2
Rear bearing installer J-24447
Equipment Condition
Output shaft oil seal installer J-24620
Paragraph
Condition Description
Dust shield installer J-24198
Main and output shaft orifice
3-17c(2) Transmission removed from vehicle.
installer J-24369
Output shaft bearing installer J-24451
Driver handle J-8092
Steel sleeve (2.375 I.D by 2.875 O.D.
by 1.750 inches long)
Driver handle J-24202-4
Adapter housing guide screws J-1927-1
4-120
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals