 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-4. TRANSMISSION (CONT)
j. Control Valve Assembly.
This task covers:
a. Removal
d.
Inspection
b. Disassembly
e
Reassembly
c. Cleaning
f.
Installation
INITIAL SETUP:
Tools
Personnel Required
No
2 Common Organizational Maintenance
Automotive Repairer MOS 63H
Tool Kit
Socket wrench handle, 1/2 inch drive
Equipment Condition
Socket wrench set, 1/2 inch drive
Paragraph
Condition Description
Flat tip screwdriver
Torque wrench, 1/2 inch drive,
4-4h Modulated lockup valve assem-
175 pounds foot capacity
bly removed.
Safety glasses
4-4i Low shift valve assembly
Valve body adjusting ring tool J-24314
removed.
Small parts bins
Materials/Parts
Cleaning solvent
Item 1, Appendix C
Clean cloths
Item 2, Appendix C
Oil-soluble grease
Item 9, Appendix C
Crocus cloth
Item 12, Appendix C
Rubber band
Item 13, Appendix C
Small identification
tags
Item 14, Appendix C
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Transmis-
a
Valve (1)
Retain
Use rubber band to secure to
sion
pad on control valve body
(2), as shown, step lg
b
Capscrew (3)
Remove
c
Roller and
Remove
spring (4)
d
Two top cap-
Loosen
Use to support control valve
screws (5)
body (2) while removing
other capscrews (5)
e
Remaining
Remove
capscrews
(5)
f
Two top
Remove
Hold control valve body (2)
capscrews
firmly
(5)
4-103
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals