 |
|||
|
|
|||
|
Page Title:
Modulated Lockup Valve Assembly |
|
||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-4. TRANSMISSION (CONT)
h. Modulated Lockup Valve Assembly.
This task covers:
a. Removal
d.
Inspection
b. Disassembly
e
Reassembly
c. Cleaning
f.
Installation
INITIAL SETUP:
Tools
Personnel Required
No. 2 Common Organizational Maintenance
Automotive Repairer MOS 63H
Tool Kit
Socket wrench handle, 1/2 inch drive
Equipment Condition
Socket wrench set, 1/2 inch drive
Paragraph
Condition Description
Flat tip screwdriver
Torque wrench, 1/2 inch drive,
2-41c
Transmission oil filter
175 pounds foot capacity
removed.
Safety glasses
Valve body adjusting ring tool J-24314
Materials/Parts
Cleaning solvent
Item 1, Appendix C
Clean cloths
Item 2, Appendix C
Crocus cloth
Item 12, Appendix C
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Transmis-
a
Three capscrews
Remove
Hold modulated lockup valve
sion
(1)
assembly (2) firmly while
removing last capscrew
(1)
b
Modulated lock- Remove
up valve
assembly (2)
DISASSEMBLY
NOTE
Before disassembly, note position of ring (3) in relation to pin (4). During reassembly, ring (3) must be
installed in same position, or transmission will not operate properly.
2
Valve
a
Pin (4)
Remove
Depress ring (3) with screw-
body (5)
driver
4-93
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals