REASSEMBLY (cont) - TM-9-2320-285-24-20571

TM 9-2320-285-24-2

4-4. TRANSMISSION (CONT )

g. Low Planetary, Low Clutch, and Adapter Housing Assemblies (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REASSEMBLY (cont)

External snap

Install

As shown, step 19e. Remove

(cont)

ring (13)

clutch spring compressor

base and low and first

clutch spring compressor

Rear cover

Install

Refer to para 4-4k for ex-

assembly

ploded view of governor and

gasket

rear cover assembly

Low clutch

Clearance between

Measure, as shown. Use depth micrometer to measure

clearance

piston (15)

and record distance A (top of adapter housing (9) to top

check

and top plate

plate (7)). Press firmly with hand on plates and discs(7 and

(7)

8) at point of measurement. Use depth micrometer to

measure and record distance B (top of piston (15) to top of

rear cover assembly gasket). For clearance, subtract B

from A.

Clearance must be 0.081 to 0.139 inch.

Clearance closer to minimum dimension will mean longer

clutch pack life. If necessary, replace any or all plates (7)

to achieve correct clearance

4-90