CLEANING - TM-9-2320-285-24-20557

TM 9-2320-285-24-2

4-4. TRANSMISSION (CONT)

f. First Clutch Assembly (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and

use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use

near open flame or excessive heat and don't smoke when using it. Failure to do so could cause serious injury. If

you become dizzy while using cleaning solvent, get fresh air immediately, and get medical attention. If contact with

skin or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water

immediately, and obtain medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air. Failure to do

so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

All parts

Clean

Use cleaning solvent P-D-680.

Immerse parts in solvent and

move up and down to remove

all dirt and old lubricant.

Dry thoroughly with clean,

dry, lintless cloths or with

compressed air

INSPECTION

Gear (1) and

Inspect

Inspect for worn, bent or

hub (2)

broken condition. Look for

galling and damaged teeth.

Replace part if necessary

All other parts

Inspect

Inspect for worn, bent, or

broken condition. Examine

for deep scratches. If you

notice any of these condi-

tions, replace part

4-76