 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-4. TRANSMISSION (CONT)
e. Third Clutch, Center Support, and Second Clutch Assemblies (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (cont)
10
j.
Clearance
Measure
Use snapping gage, as shown,
(cont)
between
step 10f. Select correct
top of support
snap ring (7) as listed
(8) and
top of snap
ring groove
in transmission
Measured
Snap Ring
Clearance
Thickness
Snap Ring
(Inch)
(Inch)
Color
0.150-0.154
0.148-0.150
Blue
0.154-0.157
0.152-0.154
Yellow
0.157-0.160
0.155-0.157
Green
0.160-0.164
0.158-0.160
Red
k.
Selected snap
Install
Then remove center bolt, cap-
ring (7)
screws, compressor bar, and
compressor base
11
Second
Clearance between
Measure
Turn transmission output end
clutch
plate (13) and
up. Use second clutch gage,
clearance
transmission
as shown. If required clear-
check
housing
ance of 0.049-0.111 inch is
achieved, first step of
clutch gage will fit, second
step won't. If clearance is
not correct, remove discs
(11) and plates (12) and
measure total thickness.
Replace any or all plates
(12) to achieve correct
clearance.
A thinner or
thicker plate (13) is also
available
4-69
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals