DISASSEMBLY (cont) - TM-9-2320-285-24-20525

TM 9-2320-285-24-2

4-4. TRANSMISSION (CONT)

c. Forward Clutch and Shaft Assembly (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

DISASSEMBLY (cont)

Turbine

a. Lip type ring

Remove

Return turbine shaft and

shaft and

(23)

clutch housing assembly (17)

clutch

to work table. Discard lip

housing

type ring (23)

assembly

b. Two check balls

Remove

Only if inspection shows re-

(17)

(24)

placement is necessary.

Remove staked metal from

bores to free check balls

(24)

c. Pin (25)

Remove

Depress valve plug (26)

d. Valve plug (26)

Remove

and valve

spring (27)

e. Centrifugal

Remove

valve (28)

CLEANING

WARNING'

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and

use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use

near open flame or excessive heat and don't smoke when using it. Failure to do so could cause serious injury. If

you become dizzy while using cleaning solvent, get fresh air immediately, and get medical attention. If contact with

skin or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water

immediately, and obtain medical aid immediately.

WARNING

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air. Failure to do

so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

4-44