 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-4. TRANSMISSION (CONT)
b. Main Shaft and Gear Unit Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (cont)
19
c. Both bushings
Bore
Use lathe to bore bushings
(cont)
(11)
(11) to 1.5640 to 1.5655
inches diameter. Bores must
be concentric with outside
diameter of shaft (12) with-
in 0.002 inch
20
Rear
Bearing assembly
Install
If bearing assembly (27) was
planetary(27)
removed and rear planetary
carrier
carrier assembly (26) was
(26)
not repaired
21
Drum (13)
a. Rear planetary
Install
Drum front side down
carrier
assembly (26)
b. Internal snap
Install
ring (25)
22
Gear (23)
a. Gear (20)
Install
Into rear of gear (23)
b. Snap ring (24)
Install
23
Gear (20)
Shaft (4)
Install
Into front of gear (20)
24
Shaft (4)
External snap
Install
ring (21)
25
Drum (13)
a. Shaft (4) and
Install
Gear (20) must sit against
attached
rear planetary carrier
parts
assembly (26)
26
Shaft (4)
a. Roller bearing
Install
Position drum (13) so that
race (15)
front of shaft (4) is up.
Roller bearing race (15)
inner lip up. Retain with
oil-soluble grease
b. Bearing assembly
Install
Coat first with oil-soluble
(14)
grease
27
Drum (13)
a. Center plan-
Install
Pinion set (40) first
etary carrier
assembly (18)
b. Gear (17)
Install
Outer splines first
c. Internal snap
Install
ring (16)
4-38
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals