CLEANING - TM-9-2320-285-24-20480

TM 9-2320-285-24-2

3-43. CAB TILT HYDRAULIC SYSTEM MAINTENANCE (CONT)

e. Safety Bar (cont) .

STEP

LOCATION

ITEM

ACTION

REMARKS

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and

use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use

near open flame or excessive heat and don't smoke when using it. Failure to do so could cause serious injury. If

you become dizzy while using cleaning solvent, get fresh air and medical attention immediately. If contact with skin

or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water and obtain

medical aid immediately.

All parts

Clean

Use cleaning solvent P-D-680;

dry with clean cloths

INSPECTION

Pin (4) and

Inspect

Replace if cracked, bent, or

safety bar

otherwise damaged

(5)

All other parts

Inspect

Replace if cracked, corroded,

or threads damaged

INSTALLATION

Cab deck

Safety bar (5)

Position

In bracket on frame

weldment,

Pin (4)

Install

Align hole in pin (4) with

right hand

hole in cab deck bracket

side

Capscrew (1)

Install and

and locknut

tighten

(2)

Capscrew (3)

Install and

Apply thread sealant to

tighten

threads

Cab deck

Hoist

Disconnect

weldment

Cab tilt

Cab

Lower

To normal operating position

pump

3-474