|
|
TM 9-2320-285-24-2
3-43. CAB TILT HYDRAULIC SYSTEM MAINTENANCE (CONT)
a. Hydraulic Pump (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY (cont)
3
j.
Two spring
Remove
(cont)
washers
(44 and 45)
k.
Cotter pin (49)
Remove and
discard
l.
Washer (50)
Remove
m.
Link pin (51)
Remove
n.
Link (37)
Remove
o.
Spring washer
Remove
(52)
p.
Plunger (41)
Remove
q.
Seal (42),
Remove and
back-up ring
discard
(47), and
quad ring
(48)
r.
Pump cylinder
Remove
From pump body (1); do not
(2)
disassemble
s.
Preformed
Remove and
packing (3)
discard
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe
vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so
could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air and medical
attention immediately. If contact with skin or clothes is made, flush with large amounts of water. If contact
with eyes is made, wash eyes with water and obtain medical aid immediately.
Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air.
Failure to do so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a
foreign object is blown into your eyes, seek medical attention immediately.
3-455
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |