|
|
TM 9-2320-285-24-2
3-34. SPRINGS AND SPRING SEATS MAINTENANCE (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
7
WARNING
(cont)
Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and
use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use
near open flame or excessive heat and don't smoke when using it. Failure to do so could cause serious injury. If
you become dizzy while using cleaning solvent, get fresh air and medical attention immediately. If contact with skin
or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water and obtain
medical aid immediately.
b. All other parts
Clean
Use cleaning solvent P-D-680;
dry with clean cloths
INSPECTION
8
a. Spring pin
Inspect
Replace if cracked, scored,
assemblies
corroded, distorted, or
(3, 6, and 10)
threads damaged
b. Springs (7)
Inspect
Replace as matched pair if
either spring is cracked,
broken, distorted, or
otherwise damaged
c. Spring shackles
Inspect
Replace if cracked, corroded,
(11 and 12)
distorted, or mounting
holes elongated
d. Lubrication
Inspect
Replace if cracked, broken,
fittings
clogged, or threads damaged
(13 and 14)
e. Bushings (15,
Inspect
Replace if cracked, corroded,
16, and 17)
scored, excessively worn,
or otherwise damaged
f. All other parts
Inspect
Replace if cracked, broken,
distorted, or threads
damaged
INSTALLATION
9
Spring (7)
Two bushings (15
Press in
Use arbor press
and 16)
3-330
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |