 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-28.
STEERING SYSTEM MAINTENANCE (CONT)
e. Steering Linkage and Ball Sockets (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (cont)
5
c
All other parts
Inspect
Replace if cracked, broken,
(cont)
bent, distorted, or
threads damaged
REASSEMBLY
6
Steering
a
Body (16)
Install
On link (24). Be sure body is
linkage
installed on correct end of
link
b
Capscrew (20),
Install
Do not tighten
lock washer
(21), and
nut (22)
c
Clamp (12)
Install
On body (4)
d
Body (4)
Install
On link (24)
7
Frame, left
a
Tires and frame
Measure
Measure the distance between
hand side,
rails
frame rail and tire at both
front
front and rear, left and
right. Adjust front wheels
until both measurements
agree to within 1/8 inch
b
Pitman arm
Adjust
Turn steering wheel fully
position
right or left, until steer-
ing wheel begins to feel
spongy. Then turn wheel 3.1
turns in opposite direction
to center pitman arm
INSTALLATION
8
Front axle,
a
Rubber boot (19) Install
steering
b
Ball seat (18)
a
Lubricate
Use grease
arm
b
Install
On body (16), flat side
facing link (24)
c
Body (16)
Install
On steering arm ball stud
d
Ball seat (17)
a Lubricate
Use grease
b
Install
In body (16), concave side
facing link (24)
e
Spring (15) and
Install and
Tighten plug (14), then back
plug (14)
tighten
off until slot aligns with
body (16) cotter pin hole
f
New cotter pin
Install and
(13)
spread
3-281
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals