 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-28.
STEERING SYSTEM MAINTENANCE (CONT)
d. Power Steering Gear (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (cont)
16
n
Seal ring (28)
Install
Cover serrations on sector
(cont)
shaft (2) with a single
layer of cellophane tape.
Lightly coat sector shaft
and seal ring (28) with
clean grease. Then slide
seal ring over sector shaft
and position over retaining
ring (34)
o
Washer (27)
Install
In trunnion cover (8)
p
Seal ring (26)
Assemble and
In trunnion cover (8)
Posi-
and seal (25)
install
tion so OIL SIDE stamping
is visible after installa-
tion
q
Trunnion cover
Install
Slide over sector shaft (2)
(8)
and position against hous-
ing (11). Be sure seal ring
(28) is correctly posi-
tioned over retaining ring
(34)
r
Four socket
Install
Alternately tighten to 13-23
head screws
pounds foot
(7)
s
Seal (6)
Install
Pack with wheel bearing
grease and press over trun-
nion cover (8). Then remove
cellophane tape from sector
shaft (2)
TESTING
WARNING
If steering gear does not pass the following test, it is defective and must not be returned to service.
Disassemble the defective steering gear as necessary to replace binding or defective parts; then repeat
the tests.
3-273
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals