 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-28. STEERING SYSTEM MAINTENANCE (CONT)
d. Power Steering Gear.
This task covers:
a.
Removal
e. Reassembly
b.
Disassembly
f. Testing
c.
Cleaning
g. Installation and adjustment
d.
Inspection
INITIAL SETUP
Tools
Automotive Mechanic's Tool Kit
Wheel bearing
Socket wrench set, 1/2 inch drive
grease
Item 16, Appendix C
Flat tip screwdriver
Degreasing
No. 1 Common Organizational Maintenance
solvent
Item 18, Appendix C
Tool Kit
Stud sealant
Item 19, Appendix C
Mechanical puller kit
Hydraulic sealant
Item 20, Appendix C
Vise with jaw caps
Cellophane tape
Item 21, Appendix C
Socket wrench handle, 1/2 inch drive
Hydraulic oilItem 22, Appendix C
Socket wrench set, 3/4 inch drive
Seal kit
FSCM 77640 P/N HF640000
Torque wrench, 1/2 inch drive,
175 pounds foot capacity
Personnel Required
Torque wrench, 3/4 inch drive,
Automotive Repairer MOS 63H
600 pounds foot capacity
Retaining ring pliers
Equipment Condition
Sharpening stone
Paragraph
Condition Description
Safety glasses
Mandrel FSCM 77640 P/N GA1913
Vehicle parked on level
Soft hammer
surface, front wheels centered
Torque wrench, 1/2 inch drive,
and engine off.
20 pounds inch capacity
Cab tilted 90 degrees.
Two gallon container
2-58b
Hydraulic steering lines and
Pressure gage, 0-2000 psi
fittings removed from power
Tee
steering gear.
3-28e
Drag link ball socket discon-
Materials/Parts
nected from pitman arm on
Cleaning solvent
Item 1, Appendix C
power steering gear.
Clean cloths
Item 2, Appendix C
3-5a
Radiator removed.
Grease
Item 15, Appendix C
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Steering
a.
Nut and large
Remove
gear
lock washer
b.
Pitman arm
Remove
Use mechanical puller
2
Front left
Four capscrews and
Remove
Support steering gear
frame rail,
lock washers
inside
3-256
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals