 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-28. STEERING SYSTEM MAINTENANCE (CONT)
c. Tie Rod (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION
7
Left side
a.
Key (11)
Install
In tie rod arm (10)
steering
b.
Tie rod arm
Install
In steering knuckle (12)
knuckle
(10)
c.
Nut (9)
Install
Tighten to initial torque of
550 pounds foot; To align
cotter pin holes in nut
with holes in tie rod arm
(10), tighten to 740 pounds
foot. If final torque is
exceeded, remove nut (9)
and repeat this step
d.
New cotter
Install and
pin (8)
spread
NOTE
Perform step 7 above to install right side tie rod arm (10).
8
Cross tube
a.
Two clamps (5)
Install
On ends of cross tube (7)
(7)
b.
Two bolts (4)
Install
Don't tighten nut (3)
and nuts (3)
9
Front of
Two steering
Position
In straight ahead position
vehicle
knuckles (12)
10
Cross tube
Two tie rod ends
Install
Turn right tie rod end clock-
(7)
(6)
in cross
wise to install; turn left
tube
tie rod end counterclock-
wise to install. Screw in
equal amounts until studs
on tie rod ends align with
tapered holes in tie rod
arms (10)
11
Tie rod
a.
Two tie rod
Install
In tie rod arms (10)
arms (10)
ends (6)
3-253
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals