 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-28. STEERING SYSTEM MAINTENANCE (CONT)
c. Tie Rod (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL (cont)
2
b.
Tie rod end
Separate
Use brass drift and hammer;
(cont)
(6)
separate tie rod end (6)
from tie rod arm (10)
3
Left side
a.
Tie rod end
Separate
Use brass drift and hammer;
steering
(6)
separate tie rod end (6)
knuckle
from tie rod arm (10)
b.
Cross tube (7)
Lower to
ground
c.
Cotter pin (8)
Remove
Discard cotter pin (8)
and nut (9)
WARNING
Don't strike hardened steel parts with steel hammer. To do so could cause metal chips to hit your eyes causing you
serious injury. Seek medical attention immediately if you get metal chips in your eyes. Always wear safety glasses
when using a hammer.
d.
Tie rod arm
Separate
Use brass drift and hammer;
(10)
separate tie rod arm (10)
from steering knuckle (12)
e.
Key (11)
Remove
NOTE
Perform steps 3c through 3e above to remove remaining tie rod arm (10).
4
Tie rod
a.
Nut (3) and
Remove
bolt (4)
b.
Tie rod end
Remove
Turn left tie rod end clock-
(6)
wise to remove; turn right
tie rod end counterclock-
wise to remove
c.
Two clamps (5)
Remove
3-251
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals